SmartChem®200 间断化学分析仪
每小时对 200 个样本进行多参数分析
AMS Alliance SmartChem® 200 离散分析仪是一款全自动的湿化学直接读取平台，用于光度学和电化学分析。使用可选的 pH/电导率/ORP 分析和硝酸盐样品制备模块，它每小时可提供多达 200 次测试的吞吐量。
它配有 5 个通用的独立支架，用于装载样品、对照品和校准器，最多可装载 126 个位置和 16 种不同的试剂。
该仪器配有一组 12 个波长滤波器，范围从 340 到 880 nm，允许 9 个同时安装在船上。这允许进行可见光谱光度测量。光度分析可以通过内置模块与 pH/电导率/ORP 测试配对。
此外，SmartChem® 200 可以配备试剂冷却器系统和独特的机载可再生的预制硝酸镉还原模块和用于样品加载的条形码读取器。
了解科学界如何使用 SmartChem®：
国家生物技术信息中心： https://www.ncbi.nlm.nih.gov/pmc/?term=smartchem
谷歌学术： https://scholar.google.com/scholar?hl=en&as_sdt=0%2C5&q=smartchem+ams+alliance&btnG =
特征
- 对饮用水、废水和土壤样本进行广泛的物理化学分析
- 多参数（合并）自动化平台
- 光度学和电化学分析
- 耗水量低
- IF THEN 驱动的测试序列
- 可编程和受监控的比色皿清洗模块
- 试剂库存系统和液位传感
- 提供 pH/cond/ORP 和硝酸盐附加模块
- 可用于多种方法的即用试剂
好处
- 通过仪器整合和测试自动化提高效率和生产力。让您的员工摆脱繁琐和重复的任务。
- 微升反应-减少试剂使用量和废物产生-提高成本效率和环境足迹。
- 我们的即用型专用试剂可确保稳定性、可重复性和可追溯性。
- 提高了自动化水平——允许完全集成 LIMS。
- 自动超出范围的重新测试决策。
- 通过我们的 Cuvette 监控清洗周期，成本终结了环境效率。
- 优化 pH、Cond、ORP 等耗时技术。
应用程序
更多参数，更好的结果
- 水与环境
- 土壤提取物、植物提取物和肥料
- 食物和饲料
- 饮料、葡萄酒和啤酒
- 化学
按细分市场查看我们的测试参数列表 这里。（不限于）
产品阵容
SmartChem® 200
- 每小时最多 200 次测试
- 台式分析仪
- 5 个样品架，用于连续装载样品（126 个位置）
- 机载试剂：最多 16 种试剂
- ~1 个支架，可放置 10 个试剂位置
- ~1 个支架，可容纳 6 个试剂位和 10 个库存标准
- 约 2 个用于存放稀释剂和其他（尖峰溶液、质量控制样品）的专用位置
它是如何运作的
真正的离散直读测量系统
SmartChem® 200 使用直读光度法，利用真正的离散式直接读取测量系统和可重复使用的高纯度光学比色皿，从而消除了样品测量受损的情况。
SmartChem® 通过一系列简短的步骤简化实验室的工作：
- 在 SmartChem® 中加载样品和试剂
- 设置您的测试
- 在 SmartChem® 软件中加载您的工作程序
- 启动您的编程例程
- 获取结果
此外，每次使用后都会对SmartChem® 比色皿进行清洗，使其可用于下一次反应/测量，从而减少您对消耗品及其可用性的依赖。
分析模块
要开始，请选择以下一个或两个选项：
- 没有
- pH/COND/ORP
然后添加所需的选项：
- 试剂冷却器
- 条码读取器
系统组件
性能、灵活性和精度
SmartChem® 200 是模块化的；您可以配置分析仪以满足您的需求。
可用配置
该仪器是模块化的，允许您配置分析仪。
试剂
即用试剂
我们提供专用于我们的 SmartChem® 系列离散分析仪的全系列酶和比色试剂。它们由我们的应用实验室开发、测试和验证，将保证您分析的完美稳定性和可重复性。
它们非常易于使用，是液体，装在专为 SmartChem® 制造的特定瓶子中。
这种即用型解决方案极大地简化了分析准备工作，并便于试剂的使用和存储。它还可以使用适合您的应用和仪器的试剂来确保您的分析安全。
要订购试剂，请发送电子邮件至 orders@kpmanalytics.com。
软件
The SmartChem® 200 software allows the user to enjoy a graphical interface fully replicating the instrument as seen by the operator and makes all procedures easy.
The SmartChem® 200 software allows the user to enjoy a graphical interface fully replicating the instrument as seen by the operator and makes all procedures easy.
System Monitor
Loading samples, reagents, controls and calibrators is done using an exact digital replica of the instrument’s panel and this allows the operator to immediately recognize all required steps.
Reagents’ levels, cuvette status and other checks are displayed in the System Monitor Screen.
System Monitor
Loading samples, reagents, controls and calibrators is done using an exact digital replica of the instrument’s panel and this allows the operator to immediately recognize all required steps.
Reagents’ levels, cuvette status and other checks are displayed in the System Monitor Screen.
Workplan Setup
After having loaded all required reagents, controls, calibrators and samples, the operator is prompted to set-up the work plan, including any required IF-THEN testing as per method or laboratory requirements.
Workplan Setup
After having loaded all required reagents, controls, calibrators and samples, the operator is prompted to set-up the work plan, including any required IF-THEN testing as per method or laboratory requirements.
Calibration Curve
Calibration can be run automatically from the SmartChem® 200 software and it uses only a concentrated standard, because the analyzer will make the relevant dilutions as defined by the standard points in the calibration.
Calibration Curve
Calibration can be run automatically from the SmartChem® 200 software and it uses only a concentrated standard, because the analyzer will make the relevant dilutions as defined by the standard points in the calibration.
Workplan
Once the test routine is finished, all results are presented in a report that can be exported to LIMS.
Workplan
Once the test routine is finished, all results are presented in a report that can be exported to LIMS.
Levey-Jennings QC Graph
For laboratories using control samples, the SmartChem® 200 software includes Levey-Jennings QC Graphs that allow the laboratory to see not only the validity of the analytical series run, but also to see any potential trends in the QC samples that may indicate a need to undertake preventive actions well before any issues may arise.
Levey-Jennings QC Graph
For laboratories using control samples, the SmartChem® 200 software includes Levey-Jennings QC Graphs that allow the laboratory to see not only the validity of the analytical series run, but also to see any potential trends in the QC samples that may indicate a need to undertake preventive actions well before any issues may arise.
Additional Software Features
- Barcode for sample loading - optional
- Addition of new samples during the run
- Accurate estimation of completion of the analysis
- Calibration points recalculation
- Pre-dilution
- Standard curves
- Computer-controlled micro pipettor
- NELAC - EPA compliant
- Real-time presentation of sample and reagent status
- Dynamic monitoring of test execution
Additional Software Features
- Barcode for sample loading - optional
- Addition of new samples during the run
- Accurate estimation of completion of the analysis
- Calibration points recalculation
- Pre-dilution
- Standard curves
- Computer-controlled micro pipettor
- NELAC - EPA compliant
- Real-time presentation of sample and reagent status
- Dynamic monitoring of test execution
规格
资源
